Lite Stage is a lightweight modular stage/trussing system with a
curved roof. The truss system is made up of Slick Lite Beam
sections. These triangular sections are manufactured from high
grade 6082-T6 aluminium alloy to a high standard. The main tubes
are 48mm O/D and the stage has German TUV approval.
The sections fit together by means of taper fitting joints, which join
very quickly and easily to form a rigid joint, which in turn allows
greater loading capacity and less deflection.
The upper tube on each curved roof beam has an extruded kader
in order that the edge of the canvas roof panels seat firmly into the
channels and pull over the roof to form a neat, weather resistant
fit. With additional canvas panels, to the rear and sides, a
completely enclosed staging system can be achieved.
The Lite Stage is very flexible in that the depth of the stage can be
varied by adding or removing sections of truss. In this manner,
when greater depth is required, it simply means adding an extra
section. Also two or more Lite stages can be connected together
side by side.
The stage comes in two standard widths, 6M and 8M, and each
come in two standard depths of 4M and 6M.
General Truss Data
H = 4.3 Mts, W = 6-10 Mts
Typical Truss Type used:
Kader extrusion used?
Back and Side walls available?
Yes, material infills only
Motors & Control needed?